Please use the Chrome or Edge browser in order to use this tool.
Ensure to use a USB data cable. Some USB cables are for charging only and can't transmit data.
Some USB slots or hubs may cause problems, here please try another USB slot on the computer.
For ConBee ensure no other application like deCONZ, Zigbee2MQTT or ZHA is using the device. Only one application can access the device.
This tool provides recent and recommended firmware versions.
Older versions can be downloaded manually and updated via the Local file
option.
ConBee I, II and III
https://deconz.dresden-elektronik.de/deconz-firmware
The command line tool GCFFlasher works natively and also supports updating RaspBee I and II. It can be downloaded from GitHub https://github.com/dresden-elektronik/gcfflasher
Product and platform specific instruction can be found at wiki/Update-deCONZ-manually
Yes, you can save this HTML page on your computer and open it locally. Only the firmware files need to be obtained separately.
The Web Updater is a single self-contained HTML file with no external depenencies.
Please refer to our support page for further help:
https://phoscon.de/support
firmware version to be flashed.
Connectand in the browser popup select the USB device.
Note: The device might be named USB JTAG/serial debug unit.
OK to proceed first unplug the from USB.
Now wait seconds.
(keep disconnected from USB).
OK now connect the to USB again to start flashing the firmware.
The firmware is now being programmed to the .
% done.
The firmware on has been updated.
Something went wrong, please try again. The FAQ may further help to trouble shoot.