Technical specification
| Name | Description |
|---|---|
| Rated voltage | 5 V DC 12 V DC 24 V DC |
| Rated current | max. 6 A per channel max. 6 A total all channels |
| Rated power | 30 W at 5 V DC 72 W at 12 V DC 144 W at24 V DC |
| Connection terminal | Spring clamp 8 pins Solid conductor: 0.14 to 1.5 mm² / 28 to 16 AWG fine-stranded conductor: 0.14 to 1.5 mm² / 26 to 14 AWG fine-stranded conductor with wire ferrule and plastic collar: 0.25 to 0.75 mm² fine-stranded conductor with wire ferrule withou plastic collar: 0.25 to 1.5 mm² Recommended wire gauge: min. 0.75mm² Stripping lenght: 8 to 9 mm / 0.31 to 0.35 inch |
| Pin assignement terminal | 1: Ground 2: Input voltage 3: Power supply voltage for LEDs 4: Output 1 5: Output 2 6: Output 3 7: Output 4 or data (individually addressable LEDs) 8: Output 5 or Ground (individually addressable LEDs) |
| Supported LEDs | common anode Voltage: 5 V DC, 12 V DC, 24 V DC Classic: RGB, RGBW, RGB+CCT, CCT, monochrome individually addressable: WS2812, WS2812B, TM1814, SK6812 A combination of classic and individually addressable LEDs is possible. |
| Mikrocontroller | Espressif ESP32-C6 |
| Transmit power | max. allowed 500 mW WiFi and Bluetooth LE |
| Radio frequency | 2.4 GHz |
| Radio standard | WiFi 6 IEEE 802.11ax, WiFi 802.11b/g/n, Bluetooth LE 5.3, IEEE 802.15.4 |
| Flash Memory | 8 MByte |
| USB | USB-C socket USB 2.0 |
| Operating temperature | -20 °C to +55 °C |
| Dimensions | 142.0 mm × 32.6 mm × 14.7 mm |
| Protection class | IP20 |
| Safety | Short circuit, overcurrent and overload
(output) overvoltage (input) temperature limitation |
| SKU | 600121 |
| EAN | 4260350821373 |
Further information
Leaflet
The product leaflet is available for download: Leaflet_FLSM.pdf
CE RED Declaration of Conformity
Hereby, dresden elektronik ingenieurtechnik gmbh declares that the radio equipment type CFLSPPMATTER is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: CE-FLSM_en.pdf
FCC part 15 compliance statement
Contains FCC ID: 2AC7Z-ESPC6WROOM1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED compliance statement
Contains IC: 21098-ESPC6WROOM1
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Le présentappareilestconf orme aux CNR d’ Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes:
- l’appareil ne doit pas produire de brouillage, et
- l’ utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.
Declaration of Compliance for Regulatory Compliance Mark
This product has been tested to comply with the ACMA mandated standards and authorize the product to label with RCM (Regulatory Compliance Mark).
Declaration of Compliance: RCM_FLSM_en.pdf
Warranty
Our products are quality-tested and provided with the statutory warranty period of 24 months from the date of purchase. Please keep the invoice as proof of purchase.